GIGABYTE B760 DS3H WIFI6E GEN5 ATX Motherboard – LGA1700 & DDR5

CPU & Chipset

• CPU Socket: LGA1700
• Supported Processors: 14th, 13th, and 12th Generation Intel® Core™, Pentium® Gold, and Celeron® Processors
• Chipset: Intel® B760 Express Chipset

Memory

• Memory Type: DDR5
• Memory Slots: 4 × DDR5 DIMM sockets (Dual-channel architecture)
• Maximum Capacity: 256 GB (64 GB single DIMM capacity)
• Supported Speeds: DDR5 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MT/s
• Supported Modules: ECC Un-buffered DIMM (operate in non-ECC mode), non-ECC Un-buffered DIMM, Extreme Memory Profile (XMP)

Onboard Graphics & Display Outputs

• Integrated Graphics: Intel® HD Graphics support (CPU-dependent)
• Display Outputs:
  • 1 × HDMI port: Up to 4096 × 2160 @ 60 Hz (HDMI 2.1, HDCP 2.3)
  • 1 × DisplayPort: Up to 4096 × 2304 @ 60 Hz (DisplayPort 1.2, HDCP 2.3)

Audio & LAN

• Audio CODEC: Realtek® Audio CODEC
• Audio Channels: High Definition Audio, 2/4/5.1/7.1-channel configurable via software
• Audio Features: Support for S/PDIF Out
• LAN: Realtek® GbE LAN chip (1 Gbps / 100 Mbps / 10 Mbps)

Wireless Communication

• Wi-Fi: Intel® Wi-Fi 6E AX210 (802.11ax, 2.4/5/6 GHz bands, 160MHz bandwidth)
• Bluetooth: Bluetooth 5.3
• Antenna: External Wi-Fi antenna connectors (2T2R)

Expansion Slots

• PCIe x16 (CPU): 1 × PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
  • Note: The PCIEX16 slot can only support a graphics card OR an NVMe SSD, not both simultaneously.
• PCIe x1 (Chipset): 4 × PCI Express x1 slots, supporting PCIe 3.0 and running at x1 (PCIEX1_1, PCIEX1_3~PCIEX1_5)

Storage Interfaces

• M.2 Slots: 2 × M.2 Socket 3 (M key)
  • M2A_CPU (CPU lanes): Supports PCIe 4.0 x4/x2 NVMe SSDs. Types 22110/2280.
  • M2P_SB (Chipset lanes): Supports PCIe 4.0 x4/x2 NVMe SSDs. Type 2280.
• SATA Ports: 4 × SATA 6Gb/s connectors
• RAID Support: RAID 0, RAID 1, RAID 5, and RAID 10 for SATA storage devices

USB Connectivity

• Back Panel:
  • 1 × USB Type-C® port (USB 3.2 Gen 2x2, 20 Gbps)
  • 1 × USB 3.2 Gen 2 Type-A port (10 Gbps, red)
  • 4 × USB 2.0/1.1 ports
• Internal Headers:
  • 1 × USB Type-C® header (USB 3.2 Gen 1, 5 Gbps)
  • 1 × USB 3.2 Gen 1 header (2 ports)
  • 2 × USB 2.0/1.1 headers (4 ports, via Chipset+USB 2.0 Hub)

Internal I/O Connectors

• 1 × 24-pin ATX main power connector
• 1 × 8-pin ATX 12V power connector
• 1 × CPU fan header
• 1 × CPU fan/water cooling pump header
• 3 × system fan headers
• 1 × system fan/water cooling pump header
• 3 × addressable RGB Gen2 LED strip headers
• 1 × RGB LED strip header
• 2 × M.2 Socket 3 connectors
• 4 × SATA 6Gb/s connectors
• 1 × front panel header
• 1 × front panel audio header
• 1 × S/PDIF Out header
• 1 × USB Type-C® header (USB 3.2 Gen 1)
• 1 × USB 3.2 Gen 1 header
• 2 × USB 2.0/1.1 headers
• 1 × Trusted Platform Module (TPM) header
• 1 × serial port header
• 1 × Q-Flash Plus button
• 1 × reset button
• 1 × reset jumper
• 1 × Clear CMOS jumper

Back Panel Connectors

• 1 × PS/2 keyboard/mouse port
• 2 × antenna connectors (2T2R)
• 1 × USB Type-C® port (USB 3.2 Gen 2x2)
• 1 × USB 3.2 Gen 2 Type-A port (red)
• 4 × USB 2.0/1.1 ports
• 1 × HDMI port
• 1 × DisplayPort
• 1 × RJ-45 port (1 GbE LAN)
• 3 × audio jacks

BIOS & Software

• BIOS: 1 × 128 Mbit flash, licensed AMI UEFI BIOS (PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0)
• Utilities: GIGABYTE Control Center (GCC), Q-Flash, Q-Flash Plus, Smart Backup
• OS Support: Windows® 11 64-bit, Windows® 10 64-bit

Physical Specifications & Compatibility

• Form Factor: ATX (30.5 cm × 24.4 cm)
• I/O Controller: iTE® I/O Controller Chip